Skip to content
TigerSystemWiki

Bambu Lab P1 series: switch to LAN mode

For the P1P and P1S — enable LAN Only mode and Developer Mode on the printer itself, then add it in Tiger Studio with its IP address, serial number and access code. See Bambu Lab compatibility for the other series and the cloud option.

P1 series — Settings, WLAN

Step 1. Enable LAN Only mode on the printer side. Enter the Settings page and select WLAN.

P1 series — selecting LAN Only mode

Select LAN Only mode.

P1 series — confirming LAN Only mode

Select Yes, and enable LAN Only mode.

P1 series — LAN Only mode ON

After enabling LAN Only mode, ON will be displayed.

P1 series — finding Developer Mode

Step 2. Enable Developer mode on the printer side. After turning on LAN Only mode, click the Scroll Down button and find Developer Mode.

P1 series — Important Notice

Select Developer Mode, and please read the Important Notice carefully.

P1 series — enabling Developer Mode

If you accept all related risks or consequences, scroll down to the end and click Enable.

P1 series — Developer Mode ON

After enabling Developer Mode, ON will be displayed. Then use the printer IP address, Serial Number and Access Code in Tiger Studio.